|
|
- Allows hose movement while restricting motion
- Reduces installation labor time by up to 70%
- Post assembly installation prevents hydraulic system
contamination
- Fastest OEM assembly and field service
- Easy retro-fit to existing applications
- Proprietary process allows cutting without fraying
- Super low co-efficiency resists wear
- Light weight, tough, highly flexible
- Mil-Spec urethane coated 1050 Ballistic Nylon
- Mil-Spec extreme Python Hook/Loop closure
- Temp range – 60º to 200ºF
- Tested to ISO 6945 abrasion standards
Sidewinder shown on the refueling hose for the US military.
|
Size 1"- 8" I.D.
Click here for technical data
Cut to Length |
Damaged cylinder rods and seals are an ongoing problem on hydraulic equipment. Dents and gouges on rods reduce seal and gland life and allow contaminates into the system. Research has shown that the damage repair is ten times the cost of prevention.
Standard 1050 Sidewinder, cut to length and clamped in place, takes minutes to install and is a fraction of the cost of custom bellows. Sidewinder can be installed without any disassembly.
How to determine size
- Extend cylinder rod to maximum length.
- Measure stroke and rod end barrel diameter.
- Choose a size same, or larger than I.D. of barrel.
- Cut length 3-4“ longer than stroke.
- Apply over barrel, and tighten with worm gear
clamp.
- Fold rod end over, and tighten with worm gear
clamp.
- Cycle the cylinder to insure proper function.
|
|
- Proprietary high fire resistance coated glass material
- Robotic welding, turbo charger,exhaust systems
- 1000ºF Material working temperature
- Resists hot slag and welding sparks
- Bundling and protection
- Para Aramid sewn construction
Size 1"- 8" I.D.
Click here for technical data
|
Weld Shield sleeve protecting hydraulic hose on a robotic welding arm. |
|
- Teflon coated glass material
- Outstanding chemical resistance
- Excellent protection from solvent sand
adhesives
- 500ºF material working temperature
- Not suited for open flame
- Great cable and wire harness protection
- Exhaust and engine application
- Para Aramid sewn construction
Size 1"- 8" I.D.
Click here for technical data
|
Teflon Glass sleeve protecting cables in close proximity to an engine turbo. |
|
- 1000 Denier Cordura With 7oz Urethane coating
- Designed for high abrasion, square edge flame cut holes, weldments, fixturing, diamond plate, machine tool.
- Temp Range –60º to 200ºF
- Outstanding U.V. resistance
- Ultra low coefficient of friction
Size 1"- 8" I.D.
Click here for technical data
|
5601 Sleeve shown in a manufacturing application protecting machine |
|
- Toughest of the tough application materials.
- Double laminate of mil-spec heavy gauge urethane laminated to a heavy nylon monofilament scrim.
- Nearly impossible to tear, or puncture.
- Abrasion protection ten times of ISO 6945.
- Extremely high resistance to U.V., oils, mild chemicals and mold.
- Temp range –80º to 200ºF
Size 1"- 8" I.D.
Click here for technical data
|
35 UBG material used to cover articulation joint where hoses rub frame |
|
- Designed for 1800ºF operating temperatures
- Good for foundry, turbo shield or asphalt equipment applications.
- Nomex and stainless hook & loop closure available by special order
- Para Aramid sewn construction
Size 1"- 8" I.D.
Click here for technical data
|
Carbon Fiber Material resisting the open flame without any damage |
|
- Good for protecting communication cables
- Light duty bundling
- Draw bar hose groups
- Light abrasion
- Temp range 0º to 200ºF
Size 1"- 8" I.D.
Click here for technical data
|
Economically priced black poly sleeve shown bundling hoses on a draw bar
application |
|
Special Order Options
- Performance engineered for application
- Eliminates need for hardware mounting
- Improves OEM assembly time 70%
- Materials for extreme abrasion
- Materials for extreme heat up to 1800º F
- High visibility safety colors
- Ground glass reflective strips
- Hook and loop closures –60ºF to 1800º F
- Unlimited hardware options
- Tethers, grommets, attached straps
- Multifunction in one sleeve
- Enhanced operator protection
- Diameter ranges from 1“to 24“
- Lengths in excess of 250 feet
Special custom sleeve covers high temp
tubes on a road patcher head preventing operator injury |
Custom 5601 sleeve with heavy Urethane coating and straps prevent abrasion from steering structure |
| |
|
