| Lubeminder - Oiler Kits |
| 21999-0238 |
Round Baler Oiler Kit - 605 Super M, 604 Super M, 605M & 604M (7 Chains) |
| 21999-0338 |
Round Baler Oiler Kit - 504 M (6 Chains) |
| 21999-0339 |
Round Baler Oiler Kit - 505 M Classic, 504 M Classic, & 5410 Rebel (5 Chains) |
| |
|
|
| 170-7515 |
Counter Display |
|
| Tubing |
|
| 7010 |
5/8" Poly Braid Hose - goes between 2 Qt Reservoir and Pump |
| 7012 |
5/32" Nylon Tubing -goes between Pump and Brushes |
| NYL-5/32-C-50 |
5/32" Nylon Tubing - 50' Roll of part # 7012 |
| 7080 |
1/4" Protective tubing for 7012 - Protection from sharp corners |
|
| Pump & Brush |
|
| 170-4514 |
Brush Assembly |
| 170-4515 |
Brass Manifold - mounts to top of Lubeminder Pump |
| 170-4516 |
In-Line Check Valve, to be used before brushes |
| 576894-4 |
5/32" Ferrule Kits - used to replace ferrules in 170-4515 (4pk) |
| 576895-4 |
Sleeve Nut (4 pk) |
| 62PL-5/32 |
Union - used to splice line |
| 164PL-5/32 |
Union Tee - used to add a line |
| 639PL-5/32 |
Plug - To be used after manifold - before brush |
| 2107001U |
Plug for top of Pump - to block port - in place of 170-4515 |
|
| 2550 |
2 Quart Reservoir |
| 170-2553 |
Cap for 2 Quart Reservoir |
|
| Brackets |
|
| 170-2017 |
Brush Bracket - Short Angle - 2 Slot |
| 170-2018 |
Brush Bracket - Long 3 Slot |
| 170-2018-S |
Brush Bracket - Small (Modified 170-2018) |
| 170-2027 |
Vermeer Bracket (modified 170-2018) |
| 170-2028 |
Vermeer Bracket |
|
| 1019 |
Screen |
| 3520 |
SS Ball |
| 170-1018 |
Repair Kit - Seal, Piston, and O-Rings |
