stop fighting for your finish

Tsunami Regenerative Air Dryers are the perfect solution for consistently clean, dry air for professional paint jobs and finishing.

 

Compressed air that contains dirt, water, and other contaminates are destructive to professional paint jobs and pro finishing. Using contaminated air in a particular application causes poor results instead of the high-quality finishes that painters, and the autobody industry, have come to expect. Taking the necessary steps to provide ultimate clean, dry air eliminates the risk in producing a poor paint job to high paying customers.

clean, dry air for the professional body shop

Eliminate moisture, dirt and particulates from your air system with premium air filtration and drying equipment from Tsunami Compressed Air Solutions.Recommended by the industry's leading paint manufacturers, Tsunami technology provides the highest quality compressed air available for professional coatings.

Have you taken all of the necessary steps to provide the high-quality air you deserve?

there are so many variables in collison repair, clean air should'nt be one of them

The effects humidity, oil, and contaminants in your compressed air system have on the quality of your paint job is often overlooked. Over half of all paint finish issues can be attributed to the quality of your compressed air.

How can you tell? Low gloss, hazing, cratering, dye back, and fish eye; these are very common defects which are directly related to the compressed air. Some can be seen right away while others may not present themselves until after the bake cycle, or, up to several days later.

When you upgrade to Tsunami, you take the guesswork out of compressed air. Our line of filtration and drying products are designed to supply the
highest quality air in environments where others cannot.

Whether protecting your employees with our Grade D Breathable Air Systems or relying on ultra dry air for spraying today’s complex waterborne paints, Tsunami systems provide consistent and professional results; every car, every time.

 

 

how do tsunami dryers compare to alternative drying solutions?

Comparative technologies like desiccant pots and refrigerant dryers show promising results but fail when faced against large surges of air and/or longer operating times. In desiccant pots, the media will reach a point of saturation where it can no longer remove the water vapor and the beads must be replaced. Refrigerant dryers fail when large surges of air pull the air too quickly through the system; not allowing the coolant to cool the air down to it’s dew point. Tsunami regenerative dryers use multiple canisters of desiccant that regenerate using sweep air. This means clean, dry air for any environment or application.