Tsunami Pure-20 Series Dryer | 80 CFM, 20 Hp (-80°F)

Tsunami Pure-20 Series

80 CFM Compressed Air Dryer

Regenerative Desiccant

The Pure-20 Series Regenerative Dryer is rated for 80 CFM airflow, and fitted for 20 Hp compressors. The Pure-20 system uses a Solenoid Timer Valve to control the dryer and Tsunami pre-filtration to assure removal of water, oil, and particulates before entering the dryer.

Tsunami Pure 20 Series_21999-1020-MM_WEB

Tsunami Pre Filtration

Tsunami pre-filtration includes the water separator and oil coalescing filter to remove liquid water, bulk oils and particulate.

Regenerative Towers

Tsunami’s Regenerative Drying Technology uses sweep air to regenerate the towers during operation. It's like changing the desiccant every two minutes.

Efficient Construction

Tsunami Dryers are efficiently designed and constructed with very few moving parts, reducing potential stress points.

Features:

2-stage Pre-filtration; Water Separator, Oil Coalescing Filter
Molecular Sieve Desiccant
Solenoid Valve Timer
Automatic Drains
Purge Exhaust Mufflers
Wall Mounting Brackets
Optional: C1D2 Compatible for hazardous locations
Heater pads available for cold temp applications

Benefits:

Dryer Performance:

Low relative humidity - down to .01% RH
Dew points down to -80°F
Easy, low-cost maintenance - under $100/year average

Filter Performance:

1st Stage Water Separator:

Removes liquid water
Filters particulate down to 10 micron

2nd Stage Oil Coalescing Filter:

Removes bulk oils and aerosols
Filters particulate down to .01 micron

Min/Max Air Inlet Temperature: 150°F

Min/Max Operating Pressure: 175

Power Requirement: 120V

Compressor Size: 20 Hp

Water Separator: #21999-1034

Replacement Element: #21999-0228

Oil Coalescing Filter: #21999-1034-Z-FD

Replacement Element: #21999-0202

Air Consumption Averages and Cycle Time
Item #	# of Towers	Orifice	CFM Consumption	Cycle Time	Tower Drying Time	# of Towers Drying	# of Towers Regen.
21999-1020	4	.030"	4.4	2 min	120 sec	2	2
21999-1020-MM	4	.030"	4.4	2 mi	120 sec	2	2

*Dryer flow rates based on 100°F at 175 PSI an outlet pressure of 100 PSI. (Minimum inlet pressure 80 PSI Lower inlet pressure and higher temperatures affect the performance and quality of the downstream air)