tgs

flame resistant sleeving

The Teflon Glass Sleeve is used for high temperature applications requiring a wear resistant cover, resistance to acid chemical, resistance to adhesion from tar, asphalt, paint and other coatings that traditionally build up on a surface. It also is widely used as protection for cables and wiring on sensors and harnesses on engine applications.

Material: Teflon coated fiberglass
Temperature Range: 550°F (287°C) constant 650°F (343°C) intermittent, core fabric 1000°F (537°C)
Abrasion Resistance: Good – intermittent low force contact
Puncture/Tear: Excellent – difficult to randomly puncture or tear
UV Protection: Excellent – best barrier, meets EN13458-1, top rating of 80 new
Chemicals: Excellent – inert coating supports use where oils, chemicals, caustic and acids are present without degrading
Wicking: Excellent

MAX DIAMETER	ITEM #	CIRCUMFERENCE (IN)	FLAT WIDTH (IN)	HOOK/LOOP (IN)	ROLL LENGTH (FT)
1	SL-1.0-TGS	3.14	3.89	0.75	150
1.25	SL-1.25-TGS	3.93	4.68	0.75	150
1.5	SL-1.5-TGS	4.71	5.46	0.75	150
1.75	SL-1.75-TGS	5.50	7.00	1.5	150
2	SL-2.0-TGS	6.28	7.78	1.5	150
2.25	SL-2.25-TGS	7.07	8.57	1.5	150
2.5	SL-2.5-TGS	7.85	9.35	1.5	150
2.75	SL-2.75-TGS	8.64	10.14	1.5	150
3	SL-3.0-TGS	9.42	10.92	1.5	150
3.25	SL-3.25-TGS	10.21	11.71	1.5	150
3.5	SL-3.5-TGS	10.99	12.49	1.5	150
4	SL-4.0-TGS	12.56	14.06	1.5	150
5	SL-5.0-TGS	15.70	17.20	1.5	150
6	SL-6.0-TGS	18.84	20.34	1.5	150
7	SL-7.0-TGS	21.98	23.48	1.5	150
8	SL-8.0-TGS	25.12	26.62	1.5	150